We focus on manufacturing iron / stainless steel / aluminum enclosures since 1996.
The surface treatment can be powder coated, electroplated, painted, brushed, polished and so on.
For outdoor enclosures, we suggest powder coated surface as it is hard and the product won't be rust easily.
|Name||Electrical Enclosure Box|
|Dimension||Same as your drawing or sample|
|Material||Iron (cold rolled steel)|
Iron plate thickness: 0.7-1.0mm
|Surface Treatment||We suggest powder coated, others are available.|
|Color||All corlos in Pantone can be made|
|Technology||All technology for metal working are available|
|Trade Term||EXW, FOB, CNF or CIF.|
|Payment Term||30% deposit before production & 70% balance before shipping.|
|Service||Professional sheet metal working services.|
Electrical Enclosure Box, Electrical Enclosure Box, Electrical Enclosure Box
Material: 1.0mm thick cold rolled steel plate.
Color: Orange You can choose the right color from the international Pantone color card.
Pressing rivets: 4 M3 rivets are welded according to the drawings.
Compression rivet size: can be selected according to requirements: M2., 3M, 4M, 5M and so on.
Hetero-aperture: Laser cutting is used to cut any pattern according to the drawing.
Internal: Welded panel: spot welded panel,
Pressure nut: 8 M4 nuts are welded to the side plates.
Shutters: As shown, the blinds are stamped inward according to the drawings.
Purpose: Heat, ventilate, and prevent rainwater from infiltrating into the box.
The vents can also be selected in the shape of an ellipse, a rectangle, an anisotropic pattern, etc., and are customized according to the drawings.
Assembly: The upper cover and the lower cover are assembled. As shown below.
The general packaging of the chassis: PO plastic bags, foam and KAA carton packaging.
1) Material: Conventional use of 0.01mm - 0.15mm bubble film to wrap the case. You can also choose the following materials: PVC, LDPE, HDPE, BOPP, etc.
Type: bubble film, ordinary plastic bag, sealed bag.
Safety awareness: All our bags will have 6 holes to prevent children from suffocating after playing with the plastic bag.
1) Type: Polyolefin foam of 30kg - 40mm thickness 7kg / / m3 is usually used, and polyurethane foam or phenolic foam can also be selected according to need.
1) Type: corrugated box or single-layer cardboard box, export products generally use corrugated boxes.
2) Application: Carton for outer packaging generally adopts A, B, C type cardboard, medium packaging adopts B, E楞 type paperboard, and small package uses E楞 type cardboard.
Carton layers: There are 3, 5 and 7 layers. It is recommended to use 5 layers for general export products and 7 layers for large and very heavy products.
Paper corner protection: L-shaped paper corners of 30*30*3 (mm) 40*40*3 (mm) are used conventionally, but also according to actual needs.
Customized chassis housing production cycle