Metal rotating shoe display stand, made of high-quality cold-rolled steel. Eight pairs of shoes can be placed on the entire display stand.
This shoe display stand can be used for shoe store display, supermarket display, home shoe display.
Depending on your preference, you can choose to rotate and not rotate. The overall size can be customized according to requirements.
If you need to order, please send us the order information to us at the following email address: firstname.lastname@example.org
1. The iron round outer tube: diameter 36 mm, can be selected between 36 mm-40 mm.
2. Iron inner tube: diameter 34 mm, can be selected between 30 mm - 35 mm.
3. Iron square tube: side length 30 mm, can choose between 20 mm - 35 mm.
1. Regular size: 450*450*1700 mm, 480*480*1800 mm (used by our company)
2, Custom size: can be customized according to needs, it is recommended that the diameter does not exceed 550 mm, the height does not exceed 1900 mm.
1, Color: white or black powder.
2, Custom color: can be customized according to Pantone or RAL color card, and provide the card number you like.
1, Tool-free installation: each layer of installation does not need to use screws and other tools, just need to directly put, only the first card is required to fix the screws, one person installed for about 15 minutes.
2, Reduce the packaging volume: product disassembly and packaging volume are smaller than the bulk of the package size of 1/2, saving domestic and foreign transportation costs.
1. You can order a rotating shoe display rack sample to test.
2. If your lead time is urgent, please let us know.
|Custom Service||We can provide 3D drawing for free and customize according to your requirements, including material, size, structure, color, and logo.|
1. Type: Acrylic head card, metalhead card or cardboard head card can be used.
1) Acrylic head card: recommended silk screen, UV printing or enamel paints
2) Metalhead card: recommended silk screen, UV printing or enamel paints
3) Cardboard head card: recommended four-color printing or UV printing
2. Shape: You can choose a circle, rectangle, square, or other specific shapes as needed.
3, fixed way: easy to fix with screws. You can freely change the different cards after removing the screws.
1. The number of layers: The original design has 4 layers, which can increase or decrease the number of layers according to actual needs. For aesthetics, it is recommended to be no more than 6 layers and no less than 3 layers.
2, size: the original length of each bracket is 20 mm, between 20 mm - 30 mm can be used. 20 mm for 34 - 39 ohms, 25 mm for 40 - 43 ohms, 30 mm for 44 - 46 ohms.
3, anti-skid design: the front end of the bracket has a baffle design to prevent the shoes from slipping. The conventional height of the baffle can be 20 mm, 25 mm or 30 mm, or it can be customized according to the type of shoe.
4, "windmill" shape design: the use of patchwork windmill shape design, unique. Other shapes can be changed according to customer preferences.
5, rotating design: relying on the gap between the tube and the tube, no bearing.
1. The number of support feet: Our company uses 4 feet to stabilize the entire display stand, and can also use 5 feet.
2, support foot shape:
1) Iron square tube: Our company adopts a 25 mm*25 mm iron square tube as support foot and can choose conventional size such as 30 mm*30 mm, 35 mm*35 mm, 40 mm*40 mm.
2) Iron round tube: At the same time, an iron round tube with a diameter of 25 mm - 40 mm can also be used as the support leg.
3, sealing the mouth: to maintain the aesthetics of the support feet, there are two ways
1) Rubber plug: The common plastic plug of the corresponding size is used to seal the nozzle, which is easy and convenient, and the cost is low.
2) Welded metal piece: Weld the corresponding size of the iron piece to seal the pipe. This method needs to be polished after welding, and the cost is higher than the rubber plug.
1) Non-sliding casters: easy to move, but only on flat ground.
2) Brake casters: easy to move, can be used on the flat or small inclined ground. (I use it)
2. Adjusting the foot:
It can be used on the uneven ground, adjust the height of the foot according to the actual situation of the ground, and maintain the balance of the display stand.
|The customer does not understand how to install the display stand, how can I help customers?|
1. Each product is equipped with an easy to understand installation manual.
2. Shoot the installation video to the customer.
1. Type: Commonly used polyolefin foam, polyurethane foam or phenolic foam can also be selected according to needs.
2. Density: Conventional 7kg/m3, 8kg/m3, 9/m3, 10/m3, other densities can be selected according to the product.
3, thickness: conventional 30mm, 10mm - 50mm can be used, it is recommended not to exceed 50mm.
1. Material: The display rack is usually made of PO or PE plastic bags.
2, thickness: display rack packaging plastic bags are commonly used 0.03mm - 0.05mm.
Ordinary plastic bag - Large-scale self-contained display stand is usually used to seal the ordinary plastic bag, which is convenient for taking out the display stand.
1, type: corrugated boxes or single-layer cardboard boxes, export products generally use corrugated boxes.
2, the number of layers of cardboard: conventionally has 3, 5, 7 layers.
It is recommended to use 5 layers for general export products and 7 layers for large and very heavy products.