Rotating Shoe Display Rack

This is a 360 degree rotating and free standing metal shoe display stand. It can display women and men shoes, such as sneakers, high-heeled shoes, casual shoes, etc.

Product Details

1.jpg

Rotating Shoe Display Rack.jpg

This is a 360 degree rotating and free standing metal shoe display stand. It can display women and men shoes, such as sneakers, high-heeled shoes, casual shoes, etc.


 Product NameRotating Shoe Display Rack
 Material

1. Iron round tube (inner tube): diameter 35mm, can choose between 30mm - 35mm

2, iron round tube (outer tube): diameter 38mm, can choose between 36mm - 40mm

3, iron square tube: side length 25mm, can choose between 20mm - 35mm

4. Acrylic sheet: 1.5mm thick acrylic sheet. Can choose between 1.0mm - 3.0mm

 Size 1. Regular size: 450*450*1700mm, 480*480*1800mm (used by our company), 500*500*1800mm, 500*500*1800mm.

2, custom size: size can be customized according to needs, the diameter is recommended not to exceed 550mm, the height is recommended not to exceed 1900mm.

 Color1, regular color: white or black powder.

2, custom color: can be customized according to Pantone or RAL color card. (The tube and the shoe can be in two different colors)

 Finish The iron material is powder coated
 Logo Custom silk printing logo on the  acrylic plate
 Application Shoe store, supermarket,  boutique, show room, etc
 Services Professional custom-made service
 Lead Time Sample: 12 - 16 days.   Batch: 22 - 26 days
 G.W. 24.6 kg
 Packaging Size 525 * 525 * 1020 mm
 Sample Fee 1/3 fee will be returned in the bulk quantity.

R

Product details

15555748502364

Head card

1. Type: Acrylic head card, metal head card or cardboard head card can be used.

1) Acrylic head card: recommended silk screen, UV printing or enamel painting

2) Metal head card: recommended silk screen, UV printing or enamel painting

3) Cardboard head card: recommended four-color printing or UV printing


2. Shape: You can choose a circle, rectangle, square or other specific shape as needed.


Fixing method: Easy to fix with screws. You can freely change the different cards after removing the screws.

15555748677234

Shoe bracket

1. Number of layers: The original design has 4 layers, which can increase or decrease the number of layers according to actual needs. For aesthetics, it is recommended to be no more than 6 layers and no less than 3 layers.


2, size: the original length of each bracket is 20mm, between 20mm - 30mm can be used. 20mm for 34 - 39 ohms, 25mm for 40 - 43 ohms, 30mm for 44 - 46 ohms.


3, anti-skid design: the front end of the bracket has a baffle design to prevent the shoes from slipping. The conventional height of the baffle can be 20mm, 25mm or 30mm, or it can be customized according to the type of shoes.


4, "windmill" shape design: the use of patchwork windmill shape design, unique. Other shapes can be changed according to customer preferences.


5, rotating design: relying on the gap between the tube and the tube, no bearing.

15555751021775

Supporting foot

1. Number of support feet: Our company uses 4 feet to stabilize the entire display stand, and can also use 5 feet.


2, support foot shape:

1) Iron square tube: Our company adopts 25mm*25mm iron square tube as support foot, and can choose 30mm*30mm, 35mm*35mm, 40mm*40mm and other conventional sizes.

2) Iron round tube: At the same time, an iron round tube with a diameter of 25mm - 40mm can also be used as the supporting foot.

3, sealing the mouth: to maintain the aesthetics of the support feet, there are two ways

1) Rubber plug: The common plastic plug of the corresponding size is used to seal the nozzle, which is easy and convenient, and the cost is low. (with photos)

2) Welded metal piece: Weld the corresponding size of iron piece to seal the pipe. This method needs to be polished after welding, and the cost is higher than the rubber plug.



Mobile mode

1, casters:

1) Non-sliding casters: easy to move, but only on flat ground. (with photos)

2) Brake casters: easy to move, can be used on flat or small inclined ground. (I use it) (with photos)




2. Adjusting the foot: 


It can be used on the uneven ground, adjust the height of the foot according to the actual situation of the ground, and maintain the balance of the display stand. (with photos)


Moving Method


1. Caster:

1) Un-brake caster: it is easy to move, but can only be used on flat ground.

YISHANG -Rotating Standing Shoe Store Displays Shoe Display Racks-Yishang-5


2) Brake caster: it is easy to move and can be used on flat or slightly tilted ground.(adopted by our company) 




2. Adjusting foot: 


It can be used on uneven ground, adjust the height of foot according to the actual situation of the ground, and maintain the balance of display frame.



otating Shoe Display Rack, Rotating Shoe Display Rack, Rotating Shoe Display Rack

Product disassembly structure

1, tool-free installation: each layer of installation does not need to use screws and other tools, just need to directly put, only the first card is required to fix the screws, one person installed for about 15 minutes.

2, reduce the packaging volume: the size of the product disassembly and packaging is smaller than the bulk of the package, saving domestic and foreign transportation costs.

 

Packaging

Plastic bag

1. Material: The display rack is usually made of PO or PE plastic bags.

2, thickness: display rack packaging plastic bags are commonly used 0.03mm - 0.05mm.

3, Type: Ordinary plastic bag - Large-scale self-contained display stand is usually used to seal the ordinary plastic bag, which is convenient for taking out the display stand.

Sealed bags - Accessories or small products for sealed bags to prevent cargo from falling off the bag.


Foam

1. Type: Commonly used polyolefin foam, polyurethane foam or phenolic foam can also be selected according to needs.

2. Density: Conventional 7kg/m3, 8kg/m3, 9/m3, 10/m3, other densities can be selected according to the product.

3, thickness: conventional 30mm, 10mm - 50mm can be used, it is recommended not to exceed 50mm.


Carton

1, type: corrugated boxes or single-layer cardboard boxes, export products generally use corrugated boxes.

2, the number of layers of cardboard: conventionally has 3, 5, 7 layers. It is recommended to use 5 layers for general export products and 7 layers for large and very heavy products.


Paper corner

1.The display frame products are generally made of L-shaped paper corners.

2, common specifications: 30 * 30 * 3mm 45 * 45 * 4mm 45 * 45 * 7mm 50 * 50 * 4mm 50 * 50 * 5mm 80*80*4mm 80*80*5mm 80*80*7mm, can also be customized according to actual needs.

5.jpg

3.jpg

Customers don't understand how to install a display stand. How can I help customers?


1. Each product is equipped with an easy to understand installation manual.


2. Shoot the installation video to the customer.

54.jpg


6.jpg


7.jpg


8.jpg
11

Inquiry